Series 25AUB-Z3 Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption.

It consists of a bronze body construction, union inlet connection, integral stainless steel strainer and high temperature resistant reinforced diaphragm for hot water.

The Series 25AUB-Z3 is available with a variety of end connections including: threaded, solder, PEX, quick-connect and CPVC with both union and double union connections.

Series 25AUB-Z3 has an adjustable pressure range and is serviceable in-line.

Maximum Working Pressure : 300psi (21 bar).

Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa).

Standard Pressure Setting: 50psi (344kPa).

Series N45B-EZ Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption.

It consists of a bronze body construction, integral stainless steel strainer, thermoplastic cage and seat, thermal expansion bypass, factory calibrated outlet pressure adjustment and easily adjustable pressure setting.

The N45B-EZ Series is available in a variety of end connections including: threaded, solder with both union and double union connections.

Maximum Working Pressure: 400psi (27.6 bar),

Adjustable Reduced Pressure Range: 25 to 75psi (172 to 517 kPa).

Standard Pressure Setting:50psi (345 kPa).

There are two types of water pressure reducing valves, direct acting and pilot operated.

Both use globe or angle style bodies.

Valves used on smaller piping diameter units are cast from brass; larger piping diameter units are made from ductile iron.

Direct acting valves, the more popular type of a water pressure reducing valves, consist of globe-type bodies with a spring-loaded, heat-resistant diaphragm connected to the outlet of the valve that acts upon a spring.

This spring holds a pre-set tension on the valve seat installed with a pressure equalizing mechanism for precise water pressure control.

Waste water Savings : When the community’s waste water treatment load is reduced, cost benefits accrue to both the environment and your bottom line.

Many municipalities prorate sewer usage fees based upon the water meter reading.

Series N55B Water Pressure Reducing Valves are used in commercial and residential applications to reduce incoming water pressure for protection of plumbing system components and to reduce water consumption.

It consists of a bronze body construction integral stainlesssteel strainer,thermo plastic seat, bronze sealed spring cage for water works pit installations and thermal expansion bypass.

The N55B is available with either double union threaded or solder end connections.

Maximum Working Pressure : 300 psi (21 bar).

Adjustable Reduced Pressure Range: 25 to75 psi (172 to 517 kPa).

Standard Pressure Setting : 50psi (345 kPa).